Edmonton Forklift Training Schools

Edmonton Forklift Training Schools - Why Forklift Training Schools Are Important To Your Business

Are you searching for work as a forklift driver? Our regulatory-compliant mobile equipment operator training provides instruction in types of forklifts, pre-shift inspection, fuel kinds and handling of fuels, and safe use of a forklift. Hands-on, practical training assists individuals participating in acquiring essential operational skills. Program content comprises existing rules governing the utilization of forklifts. Our proven forklift Schools are designed to offer training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

While the lift truck is in operation, do not raise or lower the forks. Loads should not extend over the backrest. This is due to the risk of the load sliding back towards the operator. Check for overhead obstructions and ensure there is enough clearance prior to lifting a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it slightly back.

While the load is lifted the forklift would be less stable. Make certain that no pedestrians cross below the elevated fork. The operator should not leave the forklift when the load is lifted.

The forks must be level when handling pallets, and high enough to extend all the way into and beneath the load. The width of the forks must provide even weight distribution.

Prior to loading or unloading the truck, chock the wheels and set the brakes. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed in order to support a semi-trailer which is not attached to a tractor. The entrance door height must clear the forklift height by a minimum of 5 cm. Edges of docks, rail cars and ramps must be marked and avoid them.

Click to Download the pdf